Parts of the Yarn Pet Series

This section covers operational issues and solutions as well as the various parts that are used in the series of products.

Yarn Pet Parts
The Yarn Pet consists of just a handful of parts: a 4" x 6" hardwood base a yarn guide post with an integrated wireform yarn guide a woode...
Sat, 11 Jan, 2014 at 11:15 PM
Wooden disc is not spinning
When the user installed the 2 steel collars, one on either side of the wooden disc, they placed the collars to tightly against the wooden disc so it is now ...
Sun, 12 Jan, 2014 at 12:45 AM
I can't get the collar to fit onto the rod
Each collar has a small black set screw in the body of the collar. Use your Allen Wrnech and poke it inside the hole that contains the set screw, get it itn...
Sun, 12 Jan, 2014 at 12:49 AM
The yarn guide post will not fit into the hole easily
The posts are designed to be a "press fit" into the hole in the Pet.They have a slight taper on the bottom of the post. They are not designed to g...
Sun, 12 Jan, 2014 at 12:54 AM